Guangzhou Huilian Machine Equipment Co., Ltd.
Quality Parts, Reasonable Price, Professional Service!
Add to Cart
Furukawa F22 F35 F45 Membrane Hydraulic Breaker Hammer Spare Parts Diaphragm for Hydraulic Breaker Parts Rubber Diaphragm Parts
| Model No.: | F22 F35 F45 Diaphragm for Hydraulic Breaker Parts |
| Application: | hammer breaker |
| Price: | Negotiated |
| MOQ: | 2 sets |
| Delivery Time: | within 2days |
| Material: | PU |
| Condition: | New |
| Warranty Time: | unavailable |
Hydraulic breaker spare parts we can supply:
| Hammer Parts | Main Body | Back Head | Charging Valve | Cylinder |
| Socket Plug | Piston | Adapter | Valve | Valve Plug |
| Front Head | Grease Nipple | Rod Pin | Stop Pin | Rubber Plug |
| Ring Bush | Thrust Bush | Upper Bush | Front Cover | Tool Bush |
| Rod Moil Point | Chisel | Washer | Through Bolt | Side Rod |
| Air Check Valve | Valve Adjuster | Accumulator | Accumulator Body | Accumulator Cover |
| Charging V/V | Diaphragm | Seal Kit | O-Ring Seal | Gas Seal |
| Buffer Seal | Dust Seal | U-Packing | Back-up ring | Side Bolt |
| Down Cushion | Tool Set | N2 Gas Charging Set | N2 Gas Cylinder | B-3way valve assy |
| Seal Retainer | Valve Sleeve | Front Head Pin | Lower Bush | Hex Nut |
| Socket Bolt | Step Seal | Upper Cushion | Rubber Pad | Shock Absorber |
Material analysis
| MATERIAL | HARDNESS | TEMPERATURE | MEDIUM | APPLICATEETTION |
| NBR | 40-90 Shore A | -30-100℃ | Mineral oil, grease | hydraulic cylinder |
| EPDM | 40-90 Shore A | -40-150℃ | Water, air, ozone | electrical equipment |
| Silicone | 40-90 Shore A | -60-230℃ | Oxygen, ozone | food,medicine |
| FKM | 40-90 Shore A | -30-200℃ | Oil, air, light,chemical substances | high temperature hydraulic,chemical substances |
| CR | 40-90 Shore A | -40-120℃ | Ozone,chemical substances | refrigeration,chemical substances |
| HNBR | 40-90 Shore A | -30-150℃ | Mineral oil, grease,gas | ultra-high temperature , ultra-low temperature,diaphragm |
| FFKM | 70-90 Shore A | -25-240℃ | Most chemical resistant | corrosivity,325℃ ultra-high temperature,medicine |
| TPU | 70-97 Shore A | -30-120℃ | Mineral oil, grease | hydraulic,high temperature |
| PTFE | - | -30-200℃ | Hydraulic oil | pump valve |
Compatible models
| Brand | Models |
| FURUKAWA | HB-10G/HB-15G/HB-20G/HB-30G/F-6/F-9/F-12/F-19/F-20/F-22 |
| SOOSAN | SB-40/SB-43/SB-45/SB-50(A,B)/SB-60/SB-81N/SB-81/SB-100/SB-121/SB-130/SB-140/SB-151 |
| TOKU | TNB-4E/5M/6M/6E/10E/14E/16E/TNB100/TNB150/TNB151/TNB220/TNB230 |
| KRUPP | HM-350/HM-600/HM-780/HM-800/HM-960-1/HM-960-2 |
| ATLAS-COPCO | MB-1500/MB-1600/MB-1700/HM960/HM1000/HB-2000 |
| DAEMO | DMB-210/230/250 |
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Advantages of polyurethane material:
Polyurethane elastomer is a new type of polymer synthetic material that lies between rubber and plastic. It has both the high strength of plastic and the high elasticity of rubber.
1. Wide hardness range. It still has the elongation and resilience of rubber under high hardness.
2. High strength. Their tensile strength and load-bearing capacity under rubber hardness are much higher than those of general rubber. At high hardness, its impact strength and bending strength are much higher than those of plastics.
3. Wear resistant. Its wear resistance is very outstanding, generally ranging from 0.01 to 0.10 (cm ³)/ Within a range of 1.61km, it is approximately 3-5 times that of rubber.
4. Oil resistant. Polyurethane elastomer is a highly polar polymer compound with low affinity with non-polar mineral oil, and is almost non corrosive in fuel oil and mechanical oil.
5. Good resistance to oxygen and ozone.
6. Excellent vibration absorption performance, can be used for vibration reduction and buffering. In the mold manufacturing industry, it replaces rubber and springs.
7. Has good low-temperature performance.
8. Radiation resistance. Polyurethane has good resistance to high-energy radiation, and still has satisfactory performance under 10-10 Ge Radiation exposure.
9. Has good mechanical processing performance. (Suitable for turning, milling, grinding, and drilling)
Purpose:
Polyurethane sheets have the characteristics of high strength, high wear resistance, oil resistance, and strong vibration absorption, and are widely used in vibration reduction plates, punching, stamping, sheet metal shaping, and areas with high insulation requirements for heavy-duty machinery.
Why choose us?
Q: How do you delivery the goods?
A: by sea/by air, we'll recommend the best way for you depends on goods quantity.
Q: May I have your catalogue and price list for trial order in MOQ quantity?
A: All our products were shown on net, please have a detailed looking and choose the interested models in our site.
Q: If I want cheaper quality, can you produce?
A: Yes, just send us your quality details, such as the material, what cheaper parts instead etc, we will do that as your request and calculate the price.
Q: If I order big quantity, what's the good price?
A: Please send the details enquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place etc. We will make the accurate quotation to you as soon as possible.
